Epoxy Floor Coating FAQ

A professional coating typically runs $5 to $12 per square foot, so a two-car garage (400-500 sq ft) often lands around $2,500 to $6,000. Metallic floors run $7 to $15 per square foot; large commercial areas $4 to $8. See Garage Floor Coatings.

DIY roll-on kits skip the mechanical grinding, crack repair, and moisture testing that make a coating last. That is why they commonly peel within a year. You are paying a professional for the prep and the system, not just the resin.

Yes — solid colors, dozens of flake blends, and metallic pigments, in different sheens, to match a garage, shop, home, or brand.

Epoxy is proven and cheaper but can yellow and cures slowly. Polyaspartic cures in hours, resists UV and hot tires, and lasts longer. Many floors use an epoxy or flake base with a polyaspartic topcoat. See Polyaspartic Coatings.

Flake is textured, slip-resistant, and hides dirt — best for working garages and shops. Metallic gives a high-end marbled look — best for showpiece spaces. See Flake Systems and Metallic Epoxy.

Yes. Industrial systems handle forklifts, heavy traffic, and chemicals, and work can be phased to keep you running. See Commercial Flooring.

Almost always poor prep or slab moisture. The slab must be ground or shot-blasted, cracks repaired, oil removed, and moisture tested first. See Concrete Floor Prep & Repair.

A properly prepped polyaspartic or flake system can last 15 to 20 years or more. Prep quality is the biggest factor.

A flake broadcast or anti-slip additive gives grip. Flake systems are popular in garages for this reason.

With polyaspartic, often walkable the same day and ready for vehicles in about 24 hours. Standard epoxy takes several days.

Yes — cracks and spalls are repaired and leveled, and oil and stains are degreased or ground out during prep.